- Glass fibre media made by VOLZ, in our own inhouse production
- Elastic fibre structure
- High performance in dust separation
- Dirty air side is coloured yellow for easy identification
- Ideal for carpenters workshops and metal working industry
-
For use in separation of ink mist used on dry particles of water based paint
- Glass fibre media made by VOLZ, in our inhouse production
- Elastic fibre structure
- Combines the characteristics of Paint-Stop and Dust-Stop and was specially developed for the filtration of water based paint, the media has an active adhesive
- Dirty air side is coloured magenta for easy identification
-
Ideal filtration in the applications, where aerosol, water droplets or water mist are present
- Glass fibre media made by VOLZ, in our inhouse production
- Elastic fibre structure
- Separation of liquids and/or particles from a gas stream before or after compressors, fans, gas turbines
- Dirty air side can be coloured for ease of identification
-
Safety at high temperatures in painting and drying applications
- Glass fibre media comes from our own inhouse production
- Elastic fibre structure
- High performance in paint mist or dust separation
- Applicable for higher temperatures (up to 300°C)
- Used for final filtration of supply air, in painting and drying applications
-
The right solution for coarse dust filtration in roll filter systems
- Glass fibre media made by VOLZ, in our inhouse production
- With added dust adhesive coating
- Ideal for the separation of dry dusts in carpenter´s shops and metal working industry
- Roller tape filter media are suitable for all current Roller Tape Filter Systems
-
The right choice for high levels of coarse dust
- Progressive structure – filter media is compressed towards clean air side and takes full depth of fibrous web for dust absorption
- Shatter-proof synthetic fibres
- Can be used as a pre-filter for fine dust filters and in painting systems
- Available in biostatic version ISO Coarse 70%
-
For coarse dust filtration with demands on higher air flows and high dust holding capacity
- Progressive structure – filter media is compressed towards clean air side and takes full depth of fibrous web for dust absorption
- Shatter-proof synthetic fibres
- Thermally bonded
- High dust holding capacity due to the progressive density structure of the media
- Different material thicknesses and filter efficiency
-
For fine dust filtration in all application with demands on high efficiency performance and safe dependability
- Progressive structure – filter media is compressed towards clean air side and takes full depth of fibrous web for dust absorption
- Shatter-proof synthetic fibres
- Thermally bonded
- High performance filter media
- V300 and V400 are produced without dust adhesive and polyester mesh
- V500S, V560G, V600G and V5micron are impregnated with dust adhesive and produced with polyester mesh on clean air side for higher stability and improved structure
- Different material thicknesses
-
Filter media with optimal filtration performance and dust holding capacity
- Multi layer structure of the filter media
- Shatter-proof synthetic fibres
- Progressive structure ensures full utilisation of the filter media
- Biostatic version ideally to be used when hygiene demands are high and in environments with increased air humidity
- Available as rolls, welded pockets, sewn pockets and endless pockets
-
For instalations with high demands on service life and operational safety
- Multi layer structure of the filter media
- Shatter-proof synthetic fibres
- Very robust media with high dust holding capacity and durability
- V-Series polyester versions: V30, V40, V55, V65
- V-Series progressive microfibre versions: V50, V60, V70
-
Maximum protection for your health, whilst being comfortable to the touch on your skin
- The media MEDIsyntex 20, S20, S20R are suitable for production of medical face masks type II or type IIR (EN14683: 2019), which are intended for use by medical professionals in medical facilities to protect the entire work environment
- The medium MEDIsyntex S110 is suitable for the production of respiratory protective devices/filtration half masks which are used for personnel protection in hazardous and health endangering areas, especially to protect against Covid-19
-
Bestseller of the pocket filter series with optimal filtration performance and dust holding capacity
- Multi-layer structure of the filter media
- Shatter-proof synthetic fibres
- Ultrasonic welded continuous pockets
- Low pressure drop and high dust holding capacity
- Optimal distribution of incoming flow due to optimal pocket opening
- Biostatic version can be used when hygiene demands are high and in environments with increased air humidity
-
Maximum reliability for high air quality due to increased thickness of filter media
- Multi layer structure of the filter media
- Shatter-proof synthetic fibres
- Welded continuous pockets
- Improved mechanical separation efficiency and high dust holding capacity
- Rigid pockets cannot sag onto the floor of the ducting
- Optimal distribution of incoming airflow
-
The finest indoor air quality thanks to improved filtration, as well as a reduction of energy costs
- New upgraded generation of synthetic pocket filter
- The best energy ratings A/A+
- Multi layer structure of the filter media
- Lowest initial pressure drop
- High filtration efficiency
- Up to double dust-holding capacity
- High energy savings
- Life cycle cost reduction
- Lower CO2 emissions
-
For installations with high demands on service life and operational safety
- Multi layer structure of the filter media
- Shatter-proof synthetic fibres
- Welded continuous pockets
- High dust holding capacity and durability
- Very robust inherently rigid construction
- V-shaped pockets allow better air flow
- Effective use of the filter area
- V-Series polyester versions: V30, V40, V55, V65
- V-Series progressive microfibre versions: V50, V60, V70, V80
- Performance of products in filter classes ISO ePM10 to ISO ePM1 certified by Eurovent
-
The right choice for potentially explosive areas
- Shatter-proof synthetic fibres with integrated metal mesh
- Individual stitched pockets
- Electroconductive media with integrated metal mesh
- Ex-Protect filters will not gain electrostatic charge
- For air filtration in aerial engineering plants with dangerous, combustible atmospheres (mixtures of air and burnable gases or steams)
- Device category 2, group II according to EU directive 2014/34 / EU and EN 1127-1: 2011, EN ISO 80079-36: 2016, EN ISO 80079-37: 2016, type of protection Ex “c” suitable for atmospheres with gas, steam, fog or dust
- Suitable for use in potentially explosive areas of zones 1, 2 and 21, 22 in accordance with EU Directive 1999/92 / EC. (Conductive dusts are to be excluded from the application)
- Performance of products in filter classes ISO ePM10 to ISO ePM1 certified by Eurovent
-
The right choice for high levels of coarse dust
- Progressive structure
- Shatter-proof synthetic fibres
- Welded continuous pockets
- Edge welding for higher density and pressure load
- Self-supporting pockets
- Optimal distribution of incoming flow
- Available in biostatic version – ISO Coarse 70%
- Performance of products in filter class ISO ePM10 certified by Eurovent
-
The ideal solution for high hygiene demands in environments with increased air humidity
- The use of biostatic filters contributes to improving indoor air quality so that our air is not contaminated by endotoxins or other decay and microbes or metabolic products
- In the case of extract and supply air filters, the relative humidity cannot always be kept below 80% relative humidity. This causes an inevitable explosion of growth of various bacteria and moulds
- The biostatic ingredients located within the synthetic fibres prevent odours and the formation of microorganisms on the filter, which are harmful to health
- Biostatic versions of filters are produced from Polyester or PROsyntex media.