- Activated carbon compact filter made from synthetic filter media with high efficiency activated carbon
- Activated carbon cartridges with steam activated extruded coal are easy to handle and fit due the bayonet fixing
- Applicable in commercial kitchens, assembly rooms, museums, hospitals, laboratories, computer rooms, chemical industry, paint shops, airports, petrol stations, parking garages etc.
-
The highest class of ambient air cleaning from harmful gases, vapors and unpleasant smells -
For a wide variety of applications in filtration technology- Applicable for different types of filters
- Stable and solid construction
- Material – galvanized steel or stainless steel 1.4301
- Filter elements: pocket filters, HEPA filters, panel filters, cut pads or activated coal cartridges
-
Achieves a solid filtration performance with optimal initial costs- Multi layer structure of the filter media
- Shatter-proof synthetic fibres
- Welded continuous pockets
- Optimal pocket opening
-
Achieves a solid filtration performance with optimal initial costs- Multi layer structure of the filter media
- Shatter-proof synthetic fibres
- Available as rolls, welded pockets, sewn pockets or endless pockets
-
The ideal solution for high hygiene demands in environments with increased air humidity- The use of biostatic filters contributes to improving indoor air quality so that our air is not contaminated by endotoxins or other decay and microbes or metabolic products
- In the case of extract and supply air filters, the relative humidity cannot always be kept below 80% relative humidity. This causes an inevitable explosion of growth of various bacteria and moulds
- The biostatic ingredients located within the synthetic fibres prevent odours and the formation of microorganisms on the filter, which are harmful to health
- Biostatic versions of filters are produced from Polyester or PROsyntex media.
-
Ideal filtration in the applications, where aerosol, water droplets or water mist are present- Glass fibre media made by VOLZ, in our inhouse production
- Elastic fibre structure
- Separation of liquids and/or particles from a gas stream before or after compressors, fans, gas turbines
- Dirty air side can be coloured for ease of identification
-
The right solution for limited spaces with a requirement for higher efficiency filtration- Shatter proof synthetics fibres
- Compact design
- Progressive structure mini pleated media
- Easy to handle and fit
- High dust holding capacity due to increased filter area
- Even and stable pleats due to spacers made from hot melt adhesive
- Large filter area extends change intervals and thus reduces operating costs
-
Optimal and custom made solution, fully individualised with convenient design and construction- Filter cones, filter bags, filter hoses, filter cylinders, wire frame filters, oil mist hood filters, combination filters, special pocket filters, etc
- Different filter combination
- Individual small series up to large batch sizes
-
Dry dust types have no chance to settle in your application- Glass fibre media made by VOLZ, in our own inhouse production
- Elastic fibre structure
- High performance in dust separation
- Dirty air side is coloured yellow for easy identification
- Ideal for carpenters workshops and metal working industry
-
The right choice for potentially explosive areas- Shatter-proof synthetic fibres with integrated metal mesh
- Individual stitched pockets
- Electroconductive media with integrated metal mesh
- Ex-Protect filters will not gain electrostatic charge
- For air filtration in aerial engineering plants with dangerous, combustible atmospheres (mixtures of air and burnable gases or steams)
- Device category 2, group II according to EU directive 2014/34 / EU and EN 1127-1: 2011, EN ISO 80079-36: 2016, EN ISO 80079-37: 2016, type of protection Ex “c” suitable for atmospheres with gas, steam, fog or dust
- Suitable for use in potentially explosive areas of zones 1, 2 and 21, 22 in accordance with EU Directive 1999/92 / EC. (Conductive dusts are to be excluded from the application)
- Performance of products in filter classes ISO ePM10 to ISO ePM1 certified by Eurovent
-
A reliable choice for prefiltration in all kinds of HVAC, paint shops etc.- Polyester or glass fibre variants available
- Polyester media made of shatter-proof synthetics fibres
- Glass fibre media with elastic fibre structure
- Easy to handle
- Suitable for limited space
-
For fine dust filtration in all application with demands on high efficiency performance and safe dependability- Progressive structure – filter media is compressed towards clean air side and takes full depth of fibrous web for dust absorption
- Shatter-proof synthetic fibres
- Thermally bonded
- High performance filter media
- V300 and V400 are produced without dust adhesive and polyester mesh
- V500S, V560G, V600G and V5micron are impregnated with dust adhesive and produced with polyester mesh on clean air side for higher stability and improved structure
- Different material thicknesses
-
Convenient alternative for synthetic pocket filter- Micro-glass fiber media supported by a layer of synthetic scrim
- Comprehensive range of standard sizes
- Applicable as prefilters and final filters
-
Convenient alternative to synthetic compact filter- Micro-glass fibre media and hotmelt separators
- Comprehensive range of standard sizes
- Applicable as prefilters and final filter
-
Intended for the separation of various unpleasant fatty/greasy vapors, smoke and steam from the air- Aluminium or stainless steel mesh element
- Large cooling and durable surface
- In stainless or galvanized metal frame with protective metal mesh both sides
- Important help in reducing the risk of kitchen grease fire
-
The highest level for comfort climate applications- High quality glass fibre media
- Hotmelt adhesive pleat fixing
- Available as a panel filter, compact filter or multiwedge (box type – 4V´s design)
- The compact filter and multiwedge have a robust design, high stability and burst resistance and can be used for high air flows
- Applicable especially in the pharmaceutical industry, research, electrical engineering, micro technology, chemical industry and in the medical field e.g. operating rooms, intensive care units and laboratories
-
The right choice for ambitious applications in high operating temperatures- High quality glass fibre media
- Reinforced mounting frame with a flat profile which prevents the deflection of the filter at high air flow rates
- High air flow rates with small filter depth (HT-292 with standard frame) and in limited space
- Temperature resistant up to 260°C – 380°C (please refer to TDS for more information)
- Separators made from glass fibre paper
-
Maximum reliability for high air quality due to increased thickness of filter media- Multi layer structure of the filter media
- Shatter-proof synthetic fibres
- Welded continuous pockets
- Improved mechanical separation efficiency and high dust holding capacity
- Rigid pockets cannot sag onto the floor of the ducting
- Optimal distribution of incoming airflow
-
Maximum reliability for high air quality due to increased thickness of filter media- Multi layer structure of the filter media
- Shatter-proof synthetic fibres
- Improved mechanical separation efficiency and high dust holding capacity
- Available as rolls, welded pockets, sewn pockets and endless pockets
-
Safety at high temperatures in painting and drying applications- Glass fibre media comes from our own inhouse production
- Elastic fibre structure
- High performance in paint mist or dust separation
- Applicable for higher temperatures (up to 300°C)
- Used for final filtration of supply air, in painting and drying applications
-
High-quality ceiling filter cassettes in painting and drying systems and units-
- Filter pack AL200 and UG300
- High temperature ceiling filter cassettes
- High quality fiberglass media
- Temperature resistance:
- AL200 up to max 200°C
- UG up to max 200°C
- Filter pack SK100 and ZH120
- High quality ceiling filter cassettes
- Synthetic filter media
- Glass reinforcement scrim on the dirty air side
- Temperature resistance:
- SK100 up to max. 100°C
- ZH120 up to max. 120°C
- Filter pack AL200 and UG300
-
-
For use in separation of ink mist used on dry particles of water based paint- Glass fibre media made by VOLZ, in our inhouse production
- Elastic fibre structure
- Combines the characteristics of Paint-Stop and Dust-Stop and was specially developed for the filtration of water based paint, the media has an active adhesive
- Dirty air side is coloured magenta for easy identification
-
Maximum protection for your health, whilst being comfortable to the touch on your skin- Medical face mask Type II and Type IIR (EN14683:2019) are intended for use by medical professionals in medical facilities to protect the entire work environment
- 3-layer pleated non-woven material is hygienically welded with ultrasound
- High wearing comfort due to the elastic ear loops, which fix the mask behind the ears and through an anatomically adjustable nose clamp
- Medical product Class I acc. to 93/42 EEC
-
Maximum protection for your health, whilst being comfortable to the touch on your skin- The media MEDIsyntex 20, S20, S20R are suitable for production of medical face masks type II or type IIR (EN14683: 2019), which are intended for use by medical professionals in medical facilities to protect the entire work environment
- The medium MEDIsyntex S110 is suitable for the production of respiratory protective devices/filtration half masks which are used for personnel protection in hazardous and health endangering areas, especially to protect against Covid-19
-
Special clamping system of filter media leads to the cost reduction due to re-usage of the frame- Applicable for many filter types
- Produced in-house
- Stable and solid construction
- Clean air side protective grid and strengthening cross bars
- Instalation of the filter media on the dust air side by using a quick clamping system with a rod insert
-
Correct fitting of filters in different kinds of wall installations- Easy and quick to use
- Leak-free fitting of the filter units
- Stable inherently rigid construction
- Optimal adjustment and fixing mechanism which allows easy installation and centring of each filter
- For installation of pocket filters, compact filters, panel filters, changing frames and filter combination systems
-
High performance in paint mist separation- Glass fibre media made by VOLZ, in our own inhouse production
- Elastic fibre structure
- High paint or lacquer holding capacity
- Low initial pressure drop and long service life
- Dirty air side is coloured green for easy identification
-
Personnel protection in hazardous and health endangering conditions- Particle filtering halfmask is manufactured to protect against aerosols, solid and liquid not easily volatile particles such as dust and aerosols
- The halfmask provides reliable protection against biological substances – bacteria, viruses, fungi
- Ideal solution for general application in production, assembly and mechanical handling as well as for cleaning, metalworking and transport
- Protection class FFP2 NR checked according to EN 149:2001 + A1:2009 and in accordance with Regulation (EU) 2016/425 (supplier's declaration of conformity available here)
-
The right choice for high levels of coarse dust- Progressive structure – filter media is compressed towards clean air side and takes full depth of fibrous web for dust absorption
- Shatter-proof synthetic fibres
- Can be used as a pre-filter for fine dust filters and in painting systems
- Available in biostatic version ISO Coarse 70%
-
The right choice for high levels of coarse dust- Progressive structure
- Shatter-proof synthetic fibres
- Welded continuous pockets
- Edge welding for higher density and pressure load
- Self-supporting pockets
- Optimal distribution of incoming flow
- Available in biostatic version – ISO Coarse 70%
- Performance of products in filter class ISO ePM10 certified by Eurovent
-
For coarse dust filtration with demands on higher air flows and high dust holding capacity- Progressive structure – filter media is compressed towards clean air side and takes full depth of fibrous web for dust absorption
- Shatter-proof synthetic fibres
- Thermally bonded
- High dust holding capacity due to the progressive density structure of the media
- Different material thicknesses and filter efficiency
-
Bestseller of the pocket filter series with optimal filtration performance and dust holding capacity- Multi-layer structure of the filter media
- Shatter-proof synthetic fibres
- Ultrasonic welded continuous pockets
- Low pressure drop and high dust holding capacity
- Optimal distribution of incoming flow due to optimal pocket opening
- Biostatic version can be used when hygiene demands are high and in environments with increased air humidity
-
Filter media with optimal filtration performance and dust holding capacity- Multi layer structure of the filter media
- Shatter-proof synthetic fibres
- Progressive structure ensures full utilisation of the filter media
- Biostatic version ideally to be used when hygiene demands are high and in environments with increased air humidity
- Available as rolls, welded pockets, sewn pockets and endless pockets
-
The finest indoor air quality thanks to improved filtration, as well as a reduction of energy costs- New upgraded generation of synthetic pocket filter
- The best energy ratings A/A+
- Multi layer structure of the filter media
- Lowest initial pressure drop
- High filtration efficiency
- Up to double dust-holding capacity
- High energy savings
- Life cycle cost reduction
- Lower CO2 emissions
-
Reliable help for coarse dust filtration, droplets separation and air distribution for air curtain systems- Open-cell- reticulated foam filter
- Polyester version or polyester/polyurethane version available
- Easy disposal through thermal recycling
- High resistance, even to ozone and oxygen, does not contain any plasticisers
- High toughness, sponge-pored quality
- Long service life
-
The right solution for coarse dust filtration in roll filter systems- Glass fibre media made by VOLZ, in our inhouse production
- With added dust adhesive coating
- Ideal for the separation of dry dusts in carpenter´s shops and metal working industry
- Roller tape filter media are suitable for all current Roller Tape Filter Systems